Carson SA-450-80 Скачать руководство пользователя страница 2

TB0328B 

Page 2 of 7 

10/18/03 

 

SA-450-80 (old version)    SPECIFICATIONS 

 

INPUT POWER: 

11-16 Volts DC, 8 Amps DC 

 
SIREN MODE 
OUTPUT POWER: 

105 Watts RMS   (15 VDC input, 100W speaker) 

 
AUDIO MODE 
OUTPUT POWER: 

40 Watts RMS   (14 VDC input, 100W speaker) 

 
SIREN 
FREQUENCY: 

450Hz - 1500Hz  Nominal 

 

CYCLE RATES: 

WAIL - 14 cycles/min 

 

YELP - 190 cycles/min  

 

PHASER - 15 cycles/sec 

AUDIO 
RESPONSE: 

200Hz - 10KHz +/-3db 

 

Harmonic Distortion Less than 3% @ 1KHz 

 

RADIO INPUT 
SENSITIVITY:

 

0.75VAC Input Min. for 40 Watts RMS Output 

 

OPERATING 
TEMPERATURE: 

-15° F  to +140° F 

 

SIZE: 

5-1/8" Wide X 2-3/8" High X 5-7/8" Deep 

 

WEIGHT: 

4 pounds 

 

NIGHT VISIBILITY: 

Power light 

 

PROTECTION: 

High Voltage – Siren output stops with input voltage above highest rating 
    Stops high output power from blowing speaker 
Reverse Polarity - Fuse blows when power is wired backwards 
Shorted Output – Fuse blows if speaker shorts (a common problem) 

 
 
 
 
 
 
 

NOTICE 

Due to continuous product improvements, we must reserve the right to change any specifications and information, 
contained in this manual at any time without notice. 
Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, 
the implied warranties of merchantability and fitness for a particular purpose. 
Carson Manufacturing Co., Inc. shall not be liable for errors contained herein or for incidental or consequential 
damages in connection with the furnishing, performance, or use of this manual. 

Содержание SA-450-80








Отзывы: