Page 4 of 12 SA-400-11 Installation and Operating Instructions
12/14/09
CP4931B
INSTALLATION
Proper installation of the unit is essential for years of safe, reliable operation. Please read all
instruction
before
installing the unit. Failure to follow these instructions can cause serious dam-
age to the unit or vehicle and may void warranties.
SAFETY PRECAUTIONS
For the safety of the installer, vehicle operator, passengers and the community please observe
the following safety precautions.
Failure to follow all safety precautions and instructions may
result in property damage, injury or death.
Qualifications -
The installer must have a firm knowledge of basic electricity, vehicle electrical
systems and emergency equipment.
Mounting
- Mount the unit for easy access by the vehicle operator. DO NOT mount in air bag
deployment area. Assure clearances before drilling in vehicle. To prevent internal damage
mounting bolts must not enter case more than 1/4".
Wiring
- Use wiring capable of handling the current required. Make sure all connections are tight.
Route wiring to prevent wear, overheating and interference with air bag deployment. Install and
check all wiring before connection to vehicle battery.
Testing
- Test all siren functions after installation to assure proper operation. Test vehicle opera-
tion to assure no damage to vehicle.
Keep These Instructions
- Keep these instructions in the vehicle or other safe place for future
reference. Advise the vehicle operator of the location.
UNPACKING
Inspect contents for shipping damage. If found
alert carrier immediately
.
Contact supplier immediately if any components are missing.
Contents of box should include the following items:
Qty Item
1 Amplifier Unit with attached Microphone (SA-400-11 14)
1 Bracket, Microphone Clip with mounting screws (CP3633)
1 Bracket, ‘U’ Dash Mount (CP3571)
2 Bolts, ‘U’ Mounting Bracket (CP3966)
1 Cable Assembly, 9-P Wiring Harness 3FT (CP2560)
1 Instruction Manual (CP4931 This Manual)
Sound Hazard
- Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)
