Carson Reflex Wheel Pro 2 Telemetry 500500038, Инструкция по эксплуатации

Страница: 34 / 40

1 2
34
GB
CARSON Reflex Wheel Pro 2 Telemetry 500500038
Adjustment Fail Safe
Connection from Transmitter to Receiver
1. Set the throttle and the steering wheel to the
normal position.
2. Turn on the transmitter and receiver.
3. Press the F/S SET button, the LED on the receiver
should start flashing.
4. Put the throttle trigger at the brake position,
press the “F/S SET” button, the LED should
become solid.
5. For electric models, put the throttle trigger at the
stop position when you are making the failsafe
setting.
The Reflex Wheel Pro2 telemetry is equipped with
the „failsafe pro +“. This system has integrated
additional undervoltage protection.
When the voltage for safe operation is low, the
receiver switches to the preset gas fail safe position.
1. Turn on the
transmitter and
press the bind. button
on TX. The light starts
to flash.
2. Switch on the receiver.
Press the „SW“ button.
The LED starts to flash.
The connecting process is
complete when the LED on the
receiver glows continuously.
The RC system is ready to use.
Attention
Keep the transmitter and receiver not over
40 cm apart when setting and binding.
During the binding process
no other transmitter should be
operated in the vicinity at the
same time!
3