Freque
nt
ly
A
sked
Q
ues
t
i
on
s
:
Q
1
:
What is the lens spacer for?
OR
E
ven if I pinch to zoom on my phone, my image is still a
small circle?
A
1
:
D
epending on the combination of your phone and optic, to achieve the best image you
may need to use the included lens spacer, especially for optics with small eyepieces
(microscope, telescopes, etc.) or eyepieces with long eye relief.
Insert and snap lens spacer into
place as shown in figure below, and then reattach adapter onto optic.
If the image size doesn’t
increase like figure below, then remove and do not continue to use lens spacer for that phone
and
optic combination.
Snap lens spacer into place.
S
q
ueeze open optic clamps
and insert
lens spacer in
between clamps.
Q2:
The top clamp touches the round corner of my phone not the top flat edge of my phone.
What do I do?
A2:
This is normal for some models of phones. Just push as flush to rounded edge as possible
and lock top clamp as normal.
Q
3
:
I can’t align my phone vertically with the top clamp, it won’t fit. What do I do?
A
3
:
If you go through the alignment process, and there is no way to achieve vertical alignment
because it’s restricted by the top clamp,
try removing your phone case. Alternatively,
you can
remove top clamp assembly using screw as shown below in left figure.
For this configuration,
you will not be able to save your vertical alignment between uses, and will have to adjust for
the vertical positioning of your phone for each time the phone is placed within adapter.
Save
these four parts for use with other phones, and you can reassemble the top clamp as shown
below in right figure.
6
