Carson EASY TYRANN HORNET 350, Инструкция по эксплуатации

Страница: 20 / 34

GB
// 20
It is best to fly only in closed rooms
• With sufficient free space in all directions
• On flat ground
• Without standing (furniture) or moving obstacles (persons,
animals)
• In rooms without air draught
If you want to fly outdoors, do this
• Only when there is no wind
Do not fly
• If you are exhausted or your reaction is impaired in any way.
• At wind-force 1 or greater.
• Keep your model away from high-voltage cables or radio
masts. Never use the model in lightning storms. Atmospheric
disturbances can affect the signals of your remote controlling
transmitter.
• Near any obstacles such as buildings, furniture, persons and
animals.
• On public
roads
Problem Cause Reparation
The model does not move
Check, if the transmitter and the model are
switched ON.
Switch on the Transmitter and the Model.
Check the battery voltage of transmitter
and model
Employ completely charged batteries
Motor does not turn Motor is too hot Allow the motor to cool down
The model reacts incorrectly to the con-
trol commands or flies choppily
Check the state of the transmitter and
receiver battery charges
Employ completely charged batteries
The model does not take off Rotor blades are twisted Exchange the rotor blades
Motor is too hot Allow the motor to cool down
Batteries are empty Charge the batteries or exchange them
The model moves forward/ backward and
sidewise, but does not hover
Check whether the Helicopter is exposed to
a draught, e.g. by an opened window or an
air conditioner. Hover flight is not possible
when there is a draught
Close the window/door, switch off the air
conditioner or select a more suitable room
The model vibrates severely
Check whether the rotors run true Possibly change the rotor blades
Transmitter and Helicopter can not be
binded
Throttle control not set to minimum Throttle need to be minimized to zero
TROUBLESHOOTING