CarShow CS-GM1012 GM Series, Инструкция по установке и эксплуатации

Страница: 7 / 13

CarShow Installation Guide
– GM Series
CarShow Copyright 2012 All Rights Reserved
Installation Guide CS-GM1210-12
Page 7
Re-install Climate Control Bolts
Use 7mm socket to re-install 2 x 7mm radio
mounting bolts
Turn the vehicle ON and confirm the
unit is fully operational
With the connectors Fully Engaged , turn the vehicle
on and press the RESET located at lower right corner
of radio face
Reconnect Dash Panel Harnesses
Carefully reconnect dash panel harnesses
Re-install Dash Trim
Cautiously re-install dash trim using caution not to
break plastic.
ENABLE INSTALLER SETTINGS
You will need to select certain Installer setting based on any Optional Equipment that you may have
installed
STEP
5
Launch the Installer Setting Screen
From any screen with the Menu Button, follow these
steps to display the Installer Setting Screen:
1)
From any Screen, select “Menu”
2) F
rom the Menu Screen, select “Settings”
3)
Press “Keypad,” Press “1120” and “Enter”
CAUTION