-
7
-
immediately.Note that due to static drift in GPS positioning, it is recommended that the xxx setting be
more than 500..
6.5 Power off alarm
This tracker has power down alarm function, when the power supply is break, the tracker will notice
the center number by making call 6 times, and also it will send SMS to center and slave center
number to warning the car owner. If you receive this warning information, it means some try to
remove your tracker from your vehicle or your vehicle battery is removed by someone or the vehicle
battery power is running out. Please check and confirm your vehicle is safety.
Turn on SMS power alarm:Command"pwrsms123456,1",Reply"pwr sms alarm set ok".
Cancel SMS power alarm:Command"pwrsms123456,0",Reply"pwr sms alarm set ok".
Turn on calling power alarm:Command"pwrcall123456,1",Reply"pwr call alarm set ok".
Cancel calling power alarm:Command"pwrcall123456,0",Reply"pwr call alarm set ok".
6.6 Over speed alarm
Command"speed123456 100" (set) or "speed123456 000" (cancel)to the tracker."speed"is the fixed
command,"123456"is the tracker password,100means the limited speed. Unit is km/h.After it’s been
set, you will get a reply by SMS"speed ok". Once tracker noticed that your vehicle velocity is out of
the limit, you will get alarm information directly from the tracker.
7. Tracker parameter setting:
7.1 Delete center and slave center number.
Some command operations without a password need operated by binding the phone number. This
phone number is also the target number for the locator to automatically send information when an
alarm occurs. In order to dial the locator to trigger the mobile phone positioning, the alarm can only
report to the platform when there is no authorized number, can not call and send SMS alarm, a
locator can be bound to a primary number, two secondary numbers..
Command"admin123456 13987654321"to set an authorized number.
"admin"is the fixed command;"123456"stands for the password;"13987654321"is the
Authorized number. You will get a reply with" admin ok"if it’s been set successfully;
Use your authorized number to send a message to the tracker and set the first secondary
numbers"102#13876543210#"
"102"is the fixed command;"13876543210"stands for the secondary number.
Reply"OK";
Use your authorized number to send a message to the tracker and set another secondary
numbers"103#13765432101#"
"103"is the fixed command;"13765432101"stands for the secondary number.
Reply"10x OK";
7.2 Delete center number
Use your authorized number to send a message to the tracker to delete the authorized
