tracker under the front panel of the car, or under the rear panel or under the rear glass, or in the pillar
beside the driver seat etc. And please fasten the tracker to the car body with adhesive tape or other
tape, and keep away from the other auto accessory.
3. A relay is need to install to turn off the car engine, and also a diode is necessary to add to
protect the tracker driving wire, the diagram is as follow:
Attention: Turning off engine is very dangerous when car is driving, this will
make the car difficult to control and maybe cause a accident, so we recommend make
the relay cut the start motor wire, this will make you can not remote turn off car engine,
but you can make the car engine can not be started.
4. Upload tracking control & built in battery
Connect the RED and BLACK wires to car battery, the tracker will power on automatically, and
the built in battery will be recharged automatically, after the backup battery is full, the built in
recharging circuit will stop recharging. The tracking upload is controlled by shock sensor, if the tracker
begin to move, the tracker begin upload the tracking, the tracker status on the platform will change to
online immediately. if the tracker stop moving, the tracker will stop upload the tracking , after 10
minutes the tracker status on the platform will change to offline. If you like to keep the tracker always
online, send SMS to change is OK, but this will exhaust more data charge and car battery power.
How to Use
1. First to buy a 2G GSM phone SIM card, which needs SMS service and incoming caller ID
display and GPRS function, and please disable the PIN code of the SIM card, this SIM card phone
number is the tracker number and all the operations (calling and sending SMS) to the tracker is this
number.
2. After install the SIM card to tracker, connect the tracker to car battery to power on the tracker,
