-14-
“OVERSPEEDALARMOFF*123456” (Disable over speed alarm) to the tracker, “OVERSPEEDALARMON” or
“OVERSPEEDALARMOFF” is a command, “123456” is password, “xxx is the setting speed limited”, the
tracker will send back the information “Set Over Speed Alarm ON” or “Set Over Speed Alarm OFF” to indicate
the operation is success, if the password is not right, the operation is fault, the tracker will send back
information “Wrong Password”.
After enable over speed alarm, the system will check the real time speed when the car is running. If the
current speed is higher than the setting speed limited, the tracker will send alarm and location information by
SMS to the authorized phone number. If the tracker is triggered continually, every authorized phone will receive
max 3 alarm SMS per hour. The over speed alarm SMS is as follow:
Over Speed Alarm, current speed:XXX km/h
After disable the over speed alarm, the system will not check speed again. Also send SMS
“CANCELALARM*123456” to the tracker can cancel this alarm setting.
7. Check Alarm setting
Send SMS “ALARM*123456” to tracker, “ALARM” is a command, “123456” is password, the tracker will
send back the information “Shock Alarm:OFF, Over Speed Alarm:OFF,Power Down Alarm:ON,Alarm
calling:ON,Alarm SMS:ON” to indicate all the alarm setting, if the password is not right, the operation is fault,
the tracker will send back information “Wrong Password”.This command is used for check the tracker alarm
setting.
8. Cancel All Alarm Setting
Send SMS “CANCELALARM*123456” to tracker, “CANCELALARM” is a command, “123456” is password,
the tracker will send back information “All Alarm Cancel”, and cancel all the shock alarm setting in the tracker. if
the password is not right, the operation is fault, the tracker will send back information “Wrong Password”.
Note: RESET and FACTORY also can cancel all alarm setting, about the difference please see above.
9. Listening or Monitor sound around tracker
Send SMS “LISTEN*123456” or “MONITOR*123456” to tracker, “LISTEN” and “MONITOR”is a command,
“123456” is password, then the tracker will make a call back to the SMS sender, user pick up the calling and
then the sound around the tracker can be listened. Hang up the calling will stop the LISTEN & MONITOR
command.
10. Remote Turn Off Car Engine (Cut Oil Power)
Send SMS “STOPENGINE*123456” to tracker, “STOPENGINE” is a command, “123456” is password, the
car engine will be turned off immediately. The tracker will send back information “Turn Off Car Engine
Success”, if the password is not right, the operation is fault, the tracker will send back information “Wrong
