-
3
-
Green Power LED ON continuously
: GSM Searching network
Green Power LED OFF continuously
: Power off
Red GSM LED Flash once
: Upload location to server OK
Red GSM LED Flash twice
: Upload location to server Fail
Before Using:
1. At first to buy a 3G WCDMA or 2G GSM SIM card which have SMS service and incoming caller ID
service & internet data service, in which the SIM card phone number is the very tracker number and all the
operation for the tracker is to this number, such as locating immediately, add & delete preset number, change
password, enable over speed alarm, enable move alarm etc.
Note:
1. This tracker use WCDMA/GSM network, and need about 10MB-30MB data per month
according the different working mode, recommended order a internet data package for the SIM card.
2. This tracker use micro SIM card (bigger than SIM card used in iPhone 5/6), please see the
following diagram to select the SIM card.
2. Power ON / OFF
When power is OFF, press the “ON/OFF” button till the LED is ON, then release the button, the
tracker is powered ON, when the LED flash means the tracker is working well.
When the power is ON, press the “ON/OFF” button till the Green LED Flash fast, and then
release the button,and press the ON/OFF 3 times
，
the tracker will turn off LED & tracker.
3. Install SIM card: Pulling out the long narrow rubber stopple beside the tracker, you can see the SIM
card socket, beside which, press the yellow switch button with a tool and then the holder will come out. Pull it
out and put the SIM card in the holder and then push the holder into the tracker (Pay attention to that the SIM
card metal contact pin can not face down to the holder), and push the long narrow rubber stopple into the
tracker to cover the SIM card socket.
Note: Before install or uninstall the SIM card, please power off the tracker.
4. Recharge the tracker
