Zone Manager
GB - 5
E N G L I S H
Setting mode operation
• Press the "
MODE
" button.
On the display readout, the words "
OFF
", "
AUTO
", "
COOL
", "
DRY
"
and "
FAN
ONLY
" will rotate as the "
MODE
" button is pressed.
OFF
All the units in the displayed (selected) zone are
switched off.
The temperature, fan speed and louver operating mode
indications disappear from the display.
NOTE:
If the temperature sensor in the Zone Manager is "ON", the
room air temperature will be displayed and the Setpoint
disappear from the display.
AUTO
Your system will heat or cool as needed to reach your
desired temperature.
COOL
Cooling operation
DRY
Drying operation
HEAT
Heating operation
fan only
Ventilation operation only
The temperature indication disappears from the display.
NOTE:
The operating mode setting applies to the zone selected on the
display.
Normal operation