Carrier XtendFRESH, Руководство по эксплуатации, обслуживанию и запасным частям

Страница: 32 / 72

T-366 6–8
Figure 6.10 Hose/Scrubber Locations
1. Lower the back panel ( Figure 6.4 ).
2. Unplug the scrubber heaters.
3. Loosen the hose clamps and remove the hose from the scrubber filter assembly, top and bottom ( Figure
6.10 ).
4. Remove the two bolts securing the scrubber housing to the top mounting bracket. Turn the scrubber housing
10 degrees to remove it from the unit ( Figure 6.11 ).
NOTE
Original XtendFRESH units have a tall exhaust port and port cap ( Figure 3.2 ) and need to be removed
in order to remove the housing.
Figure 6.11 Removing the Scrubber Housing
5. Move the scrubber housing to a clean area for disassembly.
6. Remove the four bolt and spring assemblies holding the scrubber housing together ( Figure 6.12 ).
Desorb In Desorb Out
Scrubber Filter
Assembly
R e m o v e
M o u n t i n g
Bolts (2) Turn Housing
to remove