14
Dimensiones
Vista general del receptor de
infrarrojos
Descripción general
El receptor de infrarrojos (WTC-IS) es
compatible únicamente con el mando a distancia
por infrarrojos (WTC-IR) y las unidades fancoil
montadas con el controlador de terminal de agua.
■
El receptor debe estar montado en la
pared.
■
El sol directo sobre el receptor puede crear
problemas en la recepción de la señal.
■
Cuando se ha enviado el comando al
controlador, el LED rojo parpadea y el
pitido indica que se ha recibido la señal
(solo si está habilitada la función de pitido).
La función de pitido únicamente puede
configurarse a través de la interfaz de
comunicación en red. Para más información
acerca de cómo habilitar o deshabilitar la
notificación mediante pitido, consulte la guía de
comunicación en red.
IMPORTANTE
: Toda la información referente
a la configuración del mando a distancia por
infrarrojos y las pruebas de instalación está
incluida en las Instrucciones de instalación para
el mando a distancia por infrarrojos (WTC-IR).
El receptor de infrarrojos (WTC-IS) está
conectado a la red a través de un solo cable
RJ45. Se puede conectar en cadena tipo
margarita usando un adaptador de subred.
Figura 2: Receptor de infrarrojos WTC: vista lateral y frontal
Figura 1: LED del receptor de infrarrojos WTC
➝ ➝ ➝
A B C
A Estado del LED rojo:
Parpadeante en caso de alarma
B Estado del LED amarillo:
Encendido en modo desocupado
C Estado del LED verde:
Encendido en modo ocupado
35 mm
20 mm
140 mm
Español