Carrier TYLER Advantage NLBN, Инструкция по установке и обслуживанию

Страница: 18 / 27

NLBR, NLBN, NLBS
Page 18 April, 2007
GENERAL INFORMATION
Rear Sliding Door Removal and
Installation
The sliding doors come installed from the
factory in the door frame. These doors are
removable for cleaning and to aid in case
maintenance.
NOTE: DO NOT FULLY
IMMERSE DOORS WHEN CLEANING . The
inner and outer doors are marked with labels
from the factory. If the doors are not labeled,
the inner door can be identified as having the
limiter stops on it.
1. Remove the outer door (1) by sliding it to
the right end of the door frame (2) (within
an inch of being closed).
2. Firmly grasp both sides of the outer door
(1) and lift into the upper track (3) until it
clears the lower track (4).
3. Tilt out the bottom of the outer door (1) so
it can clear the lower track (4).
4. Lower the outer door (1) out of the upper
track (3) to remove it from the case.
5. Repeat steps 1 thru 4 to remove the inner
door (5).
6. Reverse the above steps to replace the
inner and outer doors (5 and 1).