About Advanced Features & Operation
Page 17
KEYPAD LOCK - To prevent unauthorized use of the thermostat,
the front panel buttons may be disabled. To disable, or
‘lock’ the keypad, press and hold in the Mode button.
While holding the Mode button in, press the Up and Down
buttons in together. The
Locked
icon will appear on the
display.
SINGLE SETPOINT BEHAVIOR - When configured as a
Single
Setpoint
thermostat,
page 11, step 3
, the large number is
the setpoint. In Auto mode the deadband is above and
below the setpoint. To avoid short cycling in
single setpoint
it is recommended to raise the deadband to a minimum of 2,
page 12, step 7
.
Press and hold the Mode button for 2 seconds to display
the room temperature. Press any button to return to normal
display.
Press and hold the Fan button for 2 seconds to display the
outside temperature, if an optional outdoor sensor is
connected.
Also see page 19.
Press all 3 for
Keypad Lockout
To
unlock
the buttons, again press and hold the Mode
button. While holding the Mode button in, press the Up
and Down buttons in together. The
Locked
icon will
disappear from the display.
MODE
85
55
55
Pm
C
OOL
H
EAT
Locked
I2:00
