![background image](http://html1.mh-extra.com/html/carrier/truvu-eqt2/truvu-eqt2_installation-and-startup-manual_2563784011.webp)
Wiring the TruVu™ ET display
TruVu™ ET Display (part# EQT2)
CARRIER CORPORATION ©2020
Installation and Start-up Guide
All rights reserved
7
Wiring for Communication - Ethernet port connection
To connect to the Ethernet service port of a module, connect a patch cable from the Ethernet port on the TruVu™
ET display to the Ethernet service port on the controller.
NOTE
Your module must have drv_fwex_104.00.2182 or later for ethernet service port functionality to work.
Interface selection
On startup, the TruVu™ ET display asks which connection type should be used.
NOTE
: The USB Service Port option will be available for future use by Next Gen controllers, only.
The TruVu™ ET display remembers this selection the next time the interface is powered on. To change the
connection type, wait until the interface is attempting to connect and tap
Cancel
.
Содержание TruVu EQT2
Страница 4: ......
Страница 47: ......
Страница 48: ...CARRIER CORPORATION 2020 Catalog No 11 808 687 01 11 4 2020 ...