Carrier TRANSICOLD 05G, Операция и обслуживание, Страница: 22 / 23

3-10
Table 3-2. Wear Limits
FACTORY MAXIMUM FACTORY MINIMUM
MAXIMUM WEAR
PART NAME
FACTORY MAXIMUM FACTORY MINIMUM
MAXIMUM WEAR
BEFORE REPAIR
PART NAME
INCHES MM INCHES MM INCHES MM
SEAL END
End Play (Seal Removed) 0.035 0.8890 .030 0.7620 --- ---
Main Bearing Diameter 1.8760 47.6504 --- --- .002 0.051
Main Bearing Journal Diameter --- --- 1.8725 47.5615 .002 0.051
PUMP END
Main Bearing Diameter 1.3760 34.9504 --- --- .002 0.051
Main Bearing Journal Diameter --- --- 1.3735 34.8869 .002 0.051
CONNECTING ROD
Connecting Rod Diameter 1.3768 34.9707 --- --- .0020 0.051
Piston Pin Bearing 0.6883 17.4752 0.6878 17.4701 .001 0.0254
CRANKSHAFT
Crankpin Diameter --- --- 1.3735 34.8869 .0025 0.0635
Throw --- Height (37 CFM) 0.9698 24.6329 0.9678 24.5821 --- ---
Throw --- Height (41 CFM) 1.072 27.2288 1.070 27.1780 --- ---
THRUST WASHER (Thickness)
Pump End 0.145 3.6830 0.144 3.658 .0250 0.6350
Seal End 0.157 3.987 0.155 3.937 .0250 0.6350
CYLINDERS and PISTONS
Bore 2.0010 50.8254 --- --- .002 0.051
Piston (Diameter) --- --- See Figure 3-20 .002 0.051
Piston Pin (Diameter) --- --- 0.6873 17.4574 .001 0.025
Piston Ring Gap 0.013 0.3302 0.005 0.127 .025 0.635
Piston Ring Side Clearance 0.002 0.051 0.001 0.0254 .002 0.051
1.9960
1.9968
1.988
1.994
Figure 3-20. Piston Dimension (Wear Limits)