75 |
P a g e
Temperature Offset
The temperature offset setting can be used for calibration of the indoor
temperature reading of the thermostat. For instance, if the thermostat is reading
71
o
F and the calibration equipment is reading 70
o
F, then setting this value to -1
o
F
will shift the thermostat reading to 70
o
F.
Default:
0
o
F
Options:
Between -5
o
F and 5
o
F
On Thermostat:
Select Menu > (hold) Service > Installation Settings > Thresholds >
Temperature Offset
NOTE:
Temperature sensors used in modern thermostats have defined tolerance
intervals of normal temperature readings. This means if multiple of the same thermostat
model were installed side-by-side, it would be normal for different current temperatures
to be displayed (e.g. one at 72
o
F and one at 71
o
F). However, there are product features
and installation steps you can take to help ensure a comfortable environment.
Installation best practices for temperature accuracy:
1. Minimize the effect of air leakage, excess wiring should be pushed into the
wall and the hole should be sealed to prevent air leakage.
2. Leave the thermostat installed & powered on for at least 30 minutes before
checking calibration.
If the thermostat reading still needs adjusting after these two installation steps, adjust
the Room Air Temperature Thermostat Offset.
Содержание TP-WEM01
Страница 38: ...38 P a g e ...
Страница 50: ...50 P a g e ...
