02
01
Correct Disposal of Battery
- This marking printed in the batteries attached to your Air Conditioning product is information for end-uses .
- Batteries, at their end-of-life, should be disposed of separately from general household waste. Please,
dispose of batteries correctly at your local community waste collection or the recycling center.
CAUTION
CONTENT
1. QUICK START
1. QUICK START
2. DISPLAY AND BUTTONS
2.1 Display
2.2 Buttons
3. HOW TO USE BASIC FUNCTIONS
3.1 Basic Operations
3.2 Timer Function
4. HOW TO USE ADVANCED FUNCTIONS
FIT BATTERIES
POINT REMOTE TOWARD UNIT
PRESS POWER BUTTON
SELECT MODE
SELECT TEMPERATURE
SELECT FAN SPEED
1
6
2
5
3
4
AUTO
LOW
MED
HIGH
MODEL:
RG10B2(U)/BGEF
RG10B10(U)/BGEF
RG10B2(U)/BGCEF
MODEL:
RG10A5(U)/BGEF
RG10A11(U)/BGEF
2
3
3
4
6
6
7
9
The remote control uses two alkaline batteries (1.5 Volts).
Do not use old batteries or batteries of different types, as this may cause the controller malfunction.
The average battery life during normal use is approximately half a year.
Replace the batteries when there is no receiving beep coming from the indoor unit or transmission
indicator on the remote control fails to light.
If you do not use the remote control for more than two months, please remove the batteries.
Otherwise battery leakage may damage the remote control.
The maximum operating distance for the remote control is approximately 8 meters.
Avoid direct sunlight on the receiver of indoor unit, which may interfere with good signal reception
and the air conditioner may not work properly. Draw the curtains to avoid direct sunlight.
Keep the remote control away from water. Do not let the remote control fall down.
Never use objects with sharp point to press the button on the remote control.
Prevent any liquid from falling into the remote control.
If other electric applications react to the remote control, move these applications.
Do not dispose of batteries as unstored municipal waste. Refer to local laws for proper disposal of
batteries.
Avoid obstacles obstructions such as curtains, doors or other materials between the remote control
and the receiver of indoor unit to avoid blocking the signals from the remote control to the indoor unit.
The transmitter of remote control must be directed toward the receiver of indoor unit when pressing
the buttons of the desired functions. An acoustical acknowledgement sound (beep) will indicate that
signal has been received.
INSTRUCTIONS OF USING WIRELESS REMOTE CONTROL
Mode
My
Mode
ECO
Sleep
My
Mode
My M
ode
Follo
w M
e
LED
Turb
o
Ionis
er
Sw
ing
Tim
er
Self C
lean
Mod
e
On/O
ff
Fan
Slee
p
AUT
O
COOL
DRY
HEAT
FAN
HIG
H
MED
LOW
SET
TEMP
ER
ATU
RE
X-ECO
GB
Содержание RG10A11BGEF
Страница 44: ......