Asense CO2 Room Sensor
Installation and Operation
#NSA-ASENSE-R-LCD-REL, NSA-ASENSE-R-LCD
– 11/14/2019
Specifications subject to change without notice.
Catalog No. 11-808-746-01
Page
8
of
9
8. Click
Connect
. The unit takes approximately 30 seconds to connect.
Figure 3
9. You can now adjust your settings: ABC can be turned off, change ppm, change output scale, etc.
10. After the settings are changed, power cycled the sensor.
Adjusting the trip point on the relay
Figure 4
Click “SET” after adjustment is made.
