background image

Asense CO2 Room Sensor

 

Installation and Operation

 

 

 

#NSA-ASENSE-R-LCD-REL, NSA-ASENSE-R-LCD 

– 11/14/2019 

 

Specifications subject to change without notice. 

Catalog No. 11-808-746-01 

Page 

1

 of 

9

 

Overview 

 

The ASENSE Room Sensor series monitors the carbon dioxide (CO2) levels in commercial, school, 
and office type environments. The concentration of CO2 is a strong indication of the overall indoor 
air quality. The ASENSE Series is based on a single beam non-dispersive infrared technology and 
is a cost-optimized solution for the climate control of buildings and other processes. In addition, ABC 
software eliminates the need for manual calibration. The ASENSE Series measures the CO2 
concentration in the ambient air up to 2,000 ppm and converts the data into an analog output. This 
data can be used in conjunction with a Building Automation or Demand Control Ventilation System 
to create a healthier indoor climate. This series features an analog temperature output (32 to 122°F) 
and come with combined output options of 0-10 VDC and 0 to 20 mA (4 to 20 mA and 2-10 VDC are 
field selectable via an onboard jumper) or 0-

5 VDC for “-5” versions. A relay option is available for 

this series as well. The UIP5 software and programming cable offer a configuration/test utility and 
provide access to the main features of the ASENSE series. 

Applications

: Commercial Office Buildings, Gymnasiums, Shopping Malls, Auditoriums, Theaters, Hospitals & Schools 

 

 

Part Numbers 

 

NSA-ASENSE-R-LCD-REL 

NSA-ASENSE-R-LCD 

 

 

Specifications 

 

Supply Voltage: 

24 VAC/VDC ±20%; 50/60 Hz, 10.5 to 40 VDC maximum (Half-wave rectified) 

Power Consumption: 

<1W 

Wiring Connections: 

0.00232 in² (1.5 mm²) screw terminals 

Operating Environment: 

Residential, commercial and industrial spaces 

Operating Temperature: 

32ºF to 122ºF (0ºC to 50ºC) 

Operating RH: 

0 to 85% RH Non-condensing 

Warm-Up Time: 

<5 minutes (@ full specs 15 minutes) 

Accuracy: 

CO2

1

: ±30 ppm ±3% of reading | 

Temperature

: ±1.8ºF (1ºC) 

Repeatability: 

±20 ppm ±1% of measured value 

Annual Zero Drift: 

<± 0.3% of measurement range 

Operating Pressure: 

+1.6% per 0.145 psi (1 kPa) deviation from normal pressure, (1 Atmosphere = 14.7 psi (1.013 
KPa)) 

Sensing Method: 

Single beam Non-dispersive Infrared (NDIR) 

Sensor Life

2

>15 years 

Response Time (T1/e): 

<10 seconds @ 30 cc/minutes flow rate, <3 minutes diffusion time 

Sensing Range: 

CO2

: 0 to 2000 ppm | 

Temperature

: -4 to 140ºF (-20 to 60ºC) 

Extended CO2 Ranges: 

Up to 10,000 ppm (factory set or programming cable required) 

Extended Range Accuracy: 

+/- 30 ppm and +/- 5% of reading 

Coverage Area: 

7500 sq. ft. maximum 

Mounting Height: 

4-

6’ off the floor 

Self-Diagnostics: 

Complete function check, yellow LED; LCD error indication (display model only) 

Display (Optional): 

4 digits, 7 segments LCD with ppm indicator 

Calibration

3

Senseair ABC algorithm (Automatic Baseline Correction) 

Outputs: 

Output 1 (CO2)

: 0/2 to 10V, 0/4 to 20 mA, 0 to 2000 ppm 

Output 2 (Temperature)

: 0/2 to 10V, 0/4 to 20 mA, 32 to 122ºF (0 to 50ºC) 

Relay (Optional): 

Output 3

: N.O. or N.C. rated 0.5A @ 125 VAC; 1A @ 24 VDC 

Relay Trip Point: 

1000 ppm (factory set) 

Relay Deadband/Hysteresis: 

100 ppm (factory set) 

Relay Durability: 

Mechanical

: 5,000,000 operations minimum (at 36,000 operations/hr) 

Electrical

: 100,000 operations minimum (under rated load, at 1,800 operations/hr)

 

Storage: 

-4 to 122ºF (-20 to 50ºC) 0 to 85% RH Non-condensing

 

Содержание NSA-ASENSE-R-LCD










Отзывы: