( )
7
6. EMERGENCY FUNCTION
EMERGENCY FUNCTION
Emergency function can be used temporarily in case you can not find the remote control or its batteries
are exhausted.
To perform Emergency function, follow below steps :
1.
Open and lift the front panel up to an angle until
it remains fixed with a clicking sound.
2.
Press manual control button ( AUTO / COOL )
until AUTO led
illuminates on the display panel
of the indoor unit.
then the unit will work in forced AUTO mode
(the default setting temperature is 24°C).
3.
Close the panel firmly to its original position.
CAUTION
•
Once you press the manual control button
( AUTO / COOL ), the operation mode is shifted
in an order as :
AUTO
→
Forced COOL
→
OFF
•
Push the manual control button to operate in forced
COOL mode, this is used for testing purposes only.
You had better not choose it.
•
The Forced COOL mode is used only for testing
purposes by the installer and serviceman.
•
To restore the remote control operation, use the remote
controller directly.
Front panel
