Carrier Fan Coil, Руководство по интеграции

Страница: 19 / 50

Communications wiring
Fan Coil CARRIER CORPORATION ©2020
Integration Guide All rights reserved
15
LonWorks
WARNING
When you handle the LonWorks Option Card:
•
Do not contaminate the printed circuit board with fingerprints, moisture, or any foreign material.
•
Do not touch components or leads.
•
Handle the board by its edges.
•
Isolate from high voltage or electrostatic discharge.
•
Ensure that you are properly grounded.
Refer to Appendix E for the LonWorks Protocol Implementation Conformance Statement (PICS).
To set up the Fan Coil for the LonWorks Option Card (#LON-OC)
1
Turn off the power for the Fan Coil by disconnecting power terminals.
2
Using the rotary switches, set a unique address. Set the Tens ( 10's ) switch to the tens digit of the address,
and set the Ones ( 1's ) switch to the ones digit.
EXAMPLE If the controller’s address is 25, point the arrow on the Tens ( 10 's) switch to 2 and the arrow on
the Ones ( 1 's) switch to 5.
10's
1's
1
3
45
2
7
8
9
6
0
1
3
45
2
7
8
9
6
0
3
Set communications selector for EIA-485 .