ENH4X: Installation Instructions
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
3
For horizontal-right, install pan extension onto right end of
horizontal-condensate pan. Pan extension is slotted to fit onto
condensate pan edge and will extend into supply plenum (
).
A09084
Fig. 3 – Horizontal-Right Installation of Pan Extension
(43, 60, & 61 sizes only)
These units can be installed in multiple configurations. To ensure proper
performance of the system, install and orientate the components as
shown in
. Use
Letters (A through J) are acceptable for the furnace width and coil width
being used in a specific situation. Orientate and configure the furnace
and coil as shown in each application.
A180215A
Fig. 4 – Horizontal Installation Applications
HORIZONTAL RIGHT INSTALLATIONS
Acceptable for Air Conditioner and Heat
Pump Applications
HORIZONTAL LEFT INSTALLATIONS
Acceptable for Air Conditioner Only Applications
Application
A
Application
F
Application
B
Application
G
Application
C
Application
H
Applications Below are allowed in some cases but not recommended
Application
D
Application
I
Application
E
Application
J
4” MINIMUM