Carrier edge TP-NAC01-A, Руководство пользователя

Страница: 12 / 44

10
QUICK START
Setting or changing the temperatures for heating and cooling
Your thermostat is installed with pre- set heating and cooling temperature settings.
You can use these or change them so your home is as warm or as cool as you would
like it to be. These steps will hold the temperature where you set it until you make
another change.
1. Open the door. You will see the word
heat
or
cool
on the
screen next to the pre- set temperature, depending on the
mode your system is in. (If the thermostat is in “auto”
mode, you will see both the heating and cooling set
points. If it’s the first time you’ve used the thermostat, the
mode will say
heat
.).
2. To change the displayed temperature, press the
up
or
down
button located on the right side until you reach the
desired setting.
3. To change the other temperature setting, press the
mode
button on the left. The screen will display the word
cool
or
heat
and the pre- set temperature.
4. Press the
up
or
down
button to change the displayed setting. Stop on the
desired setting.
5. Close the door.