Carrier Comfort Touch-n-Go, Руководство пользователя

Страница: 20 / 60

18
PROGRAMMING THE THERMOSTAT
Setting the sleep temperature
1. Press the
sleep
button located under the display in the
center. You will see a triangle icon ( B ) above the
sleep
button.
2. You will see the heating and cooling temperatures that were
set at the factory. To use these, just close the door.
3. To change the factory settings, press the
sleep
button. You
will see the word heat flashing on the screen.
4. Press the
up
or
down
button on the right side of the dis-
play until you reach the desired temperature setting.
5. Press and hold the
sleep
button for about three seconds.
The set temperature will flash, indicating that it saved your
settings.
6. To change the cooling temperature setting, press the
mode
button until you see the word cool flashing on the screen.