Carrier Comfort Touch-N-Go TC-PAC, Руководство пользователя, Страница: 23 / 60

21
PROGRAMMING THE THERMOSTAT
Here’s how to change the factory--set time periods.
1. Open the door.
2. Press the
days
button at the bottom of the thermostat. You
will see
all days
,
weekdays
and
weekends
flashing on
the display. You will be changing the time periods accord-
ing to the days of the week.
All days
is used when the
household’s weekday and weekend schedules are the
same.
3. You must select one of these three time--frame options –
a ll
days, weekdays
or
weekends
– by pressing the
up
or
down
button located to the right of the display. You may
also make your selection by pressing the
days
button
again. (Select
all days
if your weekday and weekend
schedules are the same.)
4. When you have selected one of the three options (
all days
,
weekdays
,
weekends
), press the
period
button at the
bottom of the thermostat. You will see P and a flashing 1
on the screen. This is period 1 (P1), which begins at
6:00
AM
.
5. To change the hours in
P1
, press the
start time
button at
the bottom of the screen.