TROUBLESHOOTING TIPS
<标标1>
22
GB
Before calling for service, review the chart below first yourself.
Problem
What to check
Unit does not start
● Make sure the dehumidifier s plug is pushed completely into the outlet.
● Check the house fuse/circuit breaker box.
● Dehumidifier has reached its preset level or bucket is full.
●
Water bucket is not in the proper position.
Dehumidifier does not dry
the air as it should
●
Did not allow enough time to remove the moisture.
● Make sure there are no curtains, blinds or furniture blocking the front or
back of the dehumidifier.
●
The humidity control may not be set low enough.
●
Check that all doors, windows and other openings are securely closed.
●
Room temperature is too low, below 5°C(41°F).
●
There is a kerosene heater or something giving off water vapor in the
room.
The unit makes a loud
noise when operating
● The air filter is clogged.
●
The unit is tilted instead of upright as it should be.
● The floor surface is not level.
Frost appears on the coils
● This is normal. The dehumidifier has Auto defrost feature.
Water on floor
●
Hose to connector or hose connection may be loose.
●
Intend to use the bucket to collect water, but the back drain plug is
removed.
ES, AS or P2 appear in the
display
●
These are error codes and protection codes. See the
CONTROL PADS
ON THE DEHUMIDIFIER
section.
The pump operation on
light blinks at 1Hz
● Clean the filter of the pump.
●
Check the pump hose does not link or block.
●
Empty the water of the bucket.
TROUBLESHOOTING TIPS
