background image

Standby Generator Sets

Warranty

Printed in U.S.A.

CARRIER "TWO YEAR" LIMITED WARRANTY FOR 

"PREPACKAGED EMERGENCY AUTOMATIC STANDBY GENERATORS"

For a period of two years from the date of original sale, Carrier warrants that its generator will be free from defects in material and 
workmanship for the items and period set forth below. Carrier will, at its option, repair or replace any part which, upon examination, 
inspection and testing by a Carrier Dealer, is found to be defective. All transportation costs under the warranty, including return to the 
factory, are to be borne and prepaid by the purchaser/owner. This warranty applies only to Carrier prepackaged emergency automatic 
standby generators sold and rated for use in "Standby" applications.

WARRANTY SCHEDULE

YEARS ONE AND TWO - 100% (one hundred percent) transferable coverage on Labor and Part(s) listed.
ENGINE - All Components
ALTERNATOR - All Components
TRANSFER SYSTEM - All Components

Steel enclosures are warranted against rusting for the first year of ownership only. Damage caused after receipt of generator is the 
responsibility of the owner and is not covered by this warranty. Nicks, scrapes, dents or scratches to the painted enclosure should be 
repaired promptly by the owner.

THIS WARRANTY SHALL NOT APPLY TO THE FOLLOWING:

• Carrier generators that utilize non-Carrier replacement parts.
• Carrier generators utilizing non-Carrier automatic transfer switches.
• Any Carrier generators used as rental or trailer mounted applications.
•  Units used for prime power in place of existing utility power where utility power is present or in place of utility power where utility 

power service does not normally exist.

• Costs of normal maintenance, adjustments, installation and start-up.
•  Steel enclosures that are rusting due to the improper installation, location in a harsh or saltwater environment or scratched where 

integrity of paint applied is compromised.

• Failures caused by any contaminated fuels, oils, coolants or lack of proper fluid amounts.
•  Failures due, but not limited to, accident, misuse, abuse, negligence or improper installation. As with all mechanical devices, the 

Carrier engines need periodic part(s) service and replacement to perform well.

•  Failures caused by any external cause or act of God, such as collision, theft, vandalism, riot or wars, nuclear holocaust, fire, 

freezing, lightning, earthquake, windstorm, hail, volcanic eruption, water or flood, tornado or hurricane.

• Damage related to rodent and/or insect infestation.
• Products that are modified or altered in a manner not authorized by Carrier in writing.
•  Any incidental, consequential or indirect damages caused by defects in materials or workmanship, or any delay in repair or 

replacement of the defective part(s).

• Failure due to misapplication.
• Telephone, cellular phone, facsimile, internet access or other communication expenses.
•  Living or travel expenses of person(s) performing service, except as specifically included within the terms of a specific unit warranty 

period.

• Expenses related to "customer instruction" or troubleshooting where no manufacturing defect is found.
• Rental equipment used while warranty repairs are being performed.
• Costs incurred for equipment used for removal and/or reinstallation of generator, (i.e.; cranes, hoists, lifts, etc.)
• Overnight freight costs for replacement part(s).
• Overtime labor.
• Starting batteries, fuses, light bulbs and engine fluids.

THIS WARRANTY IS IN PLACE OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. SPECIFICALLY, CARRIER MAKES NO 
OTHER WARRANTIES AS TO THE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

CARRIER 'S ONLY LIABILITY SHALL BE THE REPAIR OR REPLACEMENT OF PART(S) AS STATED ABOVE. IN NO EVENT 
SHALL CARRIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF SUCH DAMAGES ARE A 
DIRECT RESULT OF CARRIER 'S NEGLIGENCE. Some states do not allow the exclusion or limitation of incidental or consequential 
damages, so the above limitation may not apply to you.
This warranty gives you specific legal rights. You also have other rights from state to state.

Revision (10/01/04)

0F8791  Rev.

 0  09/05

Содержание ASPDA1CCL045

































































Отзывы: