![Carrier 53QC 36-48 Скачать руководство пользователя страница 17](http://html.mh-extra.com/html/carrier/53qc-36-48/53qc-36-48_owners-manual_2563374017.webp)
( 14 )
USE OF REMOTE CONTROL (Cont.)
TIMER ON FUNCTION ( Off
→
Start Operation )
TIMER ON function is useful when you want to start automatically the air conditioner at a desired setting
time when you wake up in the morning or when you return home.
TO SET TIMER ON ( AUTO-ON ) TIME
1.
Press the TIMER ON button. The remote control shows TIMER ON,
the last Auto-on setting time and the signal "HOUR" will be shown
on the LCD display area. Now it is ready to reset the Auto-on time
to start the operation.
2.
Press the TIMER ON button again to set desired Auto-on time.
Each time you press the button, the time increases by half
an hour between 0 and 10 hours and by one hour between
10 and 24 hours.
3.
After setting the TIMER ON, there will be a one half second delay
before the remote control transmits the signal to the air conditioner.
Then after approximately another 2 seconds, the signal "HOUR"
will disappear and the set temperature will re-appear on the LCD
display of the remote control.
TO CANCEL TIMER ON FUNCTION
Press TIMER ON button until the time setting is 0.0
EXAMPLE OF TIMER ON SETTING
To start automatically the air conditioner in 6 hours, apply the
following steps :
1.
Press the TIMER ON button, the last setting of starting
operation time and the signal “HOUR” will show on the
display of the remote control.
2.
Press the TIMER ON button to display "6:0" on the TIMER ON
display of the remote control.
3.
Wait for 0.5 second and the TIMER ON stops flashing and this
function is activated. The display of the remote control will
show the set temperature again.
CAUTION
When you select the timer operation, the remote control automatically transmits the TIMER ON signal
to the indoor unit for the specified time.
Therefore, keep the remote control in a location where it can transmit the signal to the indoor unit
properly.
The effective operation time set by the remote control for the TIMER ON function is limited to the
following settings: 0.0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5,
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, and 24.
Start
Off
Set