Operation instructions
Vertical air flow adjustment (manually)
To adjust vertical air flow direction, adjust any one of the
horizontal louver blades. When turning up or down the horizontal
louver blades, always keep the blades horizontality. This can
effectively prevent water drops condensed on the front panel of
the unit.
VENT CONTROL
The vent control is located above the control panel. The control
method is different on different models (see the figures on the left).
For maximum cooling efficiency, CLOSE the vent. This will allow
internal air circulation. OPEN the vent to discharge stale air.
To open the vent, pull the lever
toward you; To close it, push it in.
To open the vent, set the lever to the
right position; To close it, set the lever
in the left position.
CLOSE OPEN
NOTE:
The VENTILATION LEVER should normally be kept in the
CLOSED position during cooling for maximum cooling effect. The
"OPEN" position is used only for ventilation.
Clean your air conditioner occasionally to keep it looking new.
Be sure to unplug the unit before cleaning to prevent chock
or fire hazards.
CAUTION
CLOSE VENT OPEN
9
