Carrier 48LC 14 Скачать руководство пользователя страница 55

Страница: 55 / 88

3. Clearing Alarm 060: External Interlock:

a. Press the Menu key twice to position the ▼ (triangle

icon) over Main Menu; the display changes to:

b. Press the ▼ (Down Arrow) key until the following

display appears:

c. Press OK. The display changes to:

d. Press ▼ (Down Arrow) once to highlight the bottom

row and press OK. The display changes to:

e. Press ▼ (Down Arrow) twice; the following display

appears:

f. Press OK to highlight the number in the bracket.

g. Press ▼ (Down Arrow) until the following display

appears:

h. Press OK.

i. Press Off Reset. The Alarm indicator disappears.

4. Entering Grid Type:

a. Press the Menu key to move the ▼ (triangle icon) so

it is positioned over Main Menu. The display shows

the following:

b. Press OK twice; the display changes to:

c. Press ▼ (Down Arrow) three times to reach the fol

lowing display:

d. Press OK to highlight the number in the bracket and

then use the ▲ and ▼ (Up and Down Arrow) keys to

select the desired voltage and Hertz for the unit.

e. Press OK to accept the selection and continue.

5. Entering Motor Data:

a. Press the Menu key to move the ▼ (triangle icon) so

it is positioned over Main Menu. The display shows

the following:

b. Press (Down Arrow) once to highlight the bottom

row.

c. Press OK, the display changes to:

d. Press ▼ (Down Arrow) twice to reach the following

display:

e. Press OK; the following display appears:

NOTE: The number in the bracket may be different from what is

shown above.

f. Press OK and then use the ▲ and ▼ (Up and Down

Arrow) keys to scroll to the proper motor horsepower.

Press OK again to set the selected hp.

g. Press ▼ (Down Arrow) once, the following display

appears:

h. Press OK to highlight the voltage value. Use the ▲

and ▼ (Up and Down Arrow) keys to select the

nameplate voltage. Press OK again to set the selected

voltage.

i. Press ▼ (Down Arrow) once to display the following:

j. Press OK to highlight the Frequency value and then

use the ▲ and ▼ (Up and Down Arrow) keys to

select the nameplate Hz. Press OK again to set the

selected Hz.

k. Press ▼ (Down Arrow) once to display the following:

l. Press OK to highlight the Current value and then use

the ▲ and ▼ (Up and Down Arrow) keys to select

the Max Amps value provided. Press OK again to set

the selected Max Amps.

NOTE: The Max Amps is greater than the nameplate value.

Check the VFD Unit Parameters (see Tables 33-37 on pages 59-

63) and use the value listed for the given unit in the column la

beled “Motor Current Must-Hold Amps”.

m. Press ▼ (Down Arrow) once to display the following:

n. Press OK to highlight the rpm value and then use the

▲ and ▼ (Up and Down Arrow) keys to select the

nameplate rpm. Press OK again to set the selected

rpm.

6. Entering Parameters for 1-71, 1-73, 1-82, and 1-90:

a. Press the Menu key to move the ▼ (triangle icon) so

it is positioned over Main Menu. The display shows

the following:

b. Press ▼ (Down Arrow) once to highlight the bottom

row.

c. Press OK, the display changes to:

0—** Operation / Display
1—** Load and Motor

4—** Limits / Warnings
5—** Digital In/Out

5—0* Digital I/O Mode
5—1* Digital Inputs

5—10 Terminal 18 Digital In…

[8] Start

5—12 Terminal 27 Digital In…

[7] External Interlock

5—12 Terminal 27 Digital In…

[0] No operation

0—0* Basic Settings
0—1* Set-up Operations

0—01 Language

[0] English

0—06 Grid Type

[102] 200-240V/60Hz

0—** Operation / Display
1—** Load and Motor

1—0* General Settings
1—1* Motor Selection

1—1* Motor Selection
1—2* Motor Data

1-20 Motor Power

[9] 1.5kW - 2 hp

1-22 Motor Voltage

230V

1-23 Motor Frequency

60Hz

1-24 Motor Current

6.61A

1-25 Motor Nominal Speed

1740rpm

0—** Operation / Display
1—** Load and Motor

1—0* General Settings
1—1* Motor Selection

Содержание 48LC 14

























































































Результаты поиска

Содержание 48LC 14

Отзывы:

Carrier 48LC 14, Инструкции по обслуживанию и техническому обслуживанию, Страница: 55 / 88

Результаты поиска

Содержание 48LC 14

Отзывы: