Carrier 42TSAA010, Руководство пользователя

Страница: 4 / 12

INDOOR UNIT DISPLAY
1
1 2
1
TIMER (White)
2
OPERATION (White)
● Display brightness can be adjusted, follow procedure on
!
.
REMOTE CONTROL
4
1
2
3
7
9
8
@
4
6
5
0
!
PREPARATION BEFORE USE
2
AIR FLOW DIRECTION
3
COOLING / FAN ONLY OPERATION
6
DRY OPERATION
7
Hi POWER OPERATION
8
ECO OPERATION
9
Set the timer when the air conditioner is operating.
TIMER OPERATION
10
Setting the OFF timer
1
Press for enter OFF timer setting.
2
Press for select desired OFF timer. (0.5 - 12 hrs)
3
Press for set OFF timer.
4
Press again for cancel OFF timer.
Preparing Filters
1. Open the air inlet grille and remove the air filters.
2. Attach the filters. (see detail in the Installation Manual).
Loading Batteries (when use wireless operation.)
1. Remove the slide cover.
2. Insert 2 new batteries (AAA type) following the (+)
and (–) positions.
Remote Control Reset
1. Remove the batteries.
2. Press .
3. Insert the batteries.
Note:
●
Do not move the louver manually by others.
●
The louver may automation positioning by some operation mode.
1
Press : Move the louver in
the desired vertical direction.
2
Press : Swing the air
automatically and press again to stop.
3
For horizontal direction, adjust
manually.
1
Infrared signal emitter
2
Start/Stop button
3
Mode select button ( )
4
Temperature button ( )
5
Fan speed button ( )
6
Swing louver button ( )
7
Set louver button ( )
8
Off timer button ( )
9
High power button ( )
0
Economy button ( )
!
Clear button (CLEAR)
@
Check button (CHECK )
1. Press : Select Cool or Fan only .
2. Press : Set the desired temperature. Min. 17°C, Max. 30°C
Fan Only: No temperature indication
3. Press : Select AUTO, LOW , LOW+ , MED ,
MED+ , or HIGH .
For dehumidification, a moderate cooling performance is controlled
automatically.
1. Press
: Select Dry .
2. Press : Set the desired temperature. Min. 17°C, Max. 30°C
Note: Dry mode fan speed is set to Auto only.
To automatically control room temperature and airflow for faster cooling
(except in DRY and FAN ONLY mode)
Press : Start and stop the operation.
To automatically control room temperature to save energy (except in DRY and
FAN ONLY mode)
Press
: Start and stop the operation.
Note: Cooling operation; the set temperature will increase automatically
1 degree/ hour for 2 hours (maximum 2 degrees increase).
AUTOMATIC OPERATION
5
To automatically select cooling or fan only operation
1. Press : Select Auto A.
2. Press : Set the desired temperature. Min. 17°C, Max. 30°C
3. Press : Select AUTO, LOW , LOW+ , MED ,
MED+ , or HIGH .
● In the examples of
and , the lamp illuminates for 5 seconds before
going off.
DISPLAY LAMP BRIGHTNESS ADJUSTMENT
11
Remote control
LCD
Operation display Brightness
Lamp illuminates full brightness.
100%
Lamp illuminates 50% brightness.
50%
Lamp illuminates 50% brightness and the operation lamp
is turned off.
50%
All lamps are turned off.
All turned off
To decrease the display lamp brightness or turn it off.
1. Press and hold for 3 seconds until brightness level ( , ,
or ) is shown on remote control LCD then release the button.
2. Press
Rise
or
Decrease
to adjust brightness in 4 levels
1144180208-EN,TH.indd 4 22/12/2564 8:21:32