18
Wireless Remote Controller (40VM900001)
—
Indoor unit addressing can be performed using the wireless
remote controller. When using the wireless controller, the
user must maintain a line of sight with the receiver on the
indoor unit. See Fig. 32 for a description of the buttons on
the wireless remote.
Fig. 32 —Wireless Remote Controller
(40VM900001)
Use a tool to press and hold
LOCK
for at least ten seconds,
then press to activate. Click or to select an address and
press to send the setting. To display an indoor unit address, use
the same tool to press and hold
LOCK
for at least 10 seconds,
and press to query the address.
Programmable Controller
—
When setting an address,
connect only one wired controller to an indoor unit.
1. Press
FAN
and
BACK
simultaneously for five seconds to
access the parameter settings as shown in Fig. 33.
Fig. 33 —Programmable Controller IDU
Addressing Menu
2. Press
TEMP. UP
or
TEMP. DOWN
to move cursor, and
select IDU ADDRESSING. Select
MENU/OK
to access
this setting.
3. Press
TEMP. UP
or
TEMP. DOWN
to choose the
address you want to set. See Fig. 34. Press
MENU/OK
to
send this address to the IDU.
Fig. 34 —Programmable Controller Setting IDU
Address
4. Press
BACK
twice or wait 30 seconds to automatically
exit the parameter settings menu.
MODE
N
W
O
D
.
P
M
E
T
N
A
F
MENU
TEMP. UP
OK
BACK
ON/OFF
