23
Click
TEMP. UP
or
TEMP. DOWN
to change 00 to the
desired address as shown in Fig. 37. Press
OK
to confirm and
exit the setting interface.
Fig. 37 —Non-Programmable Controller Setting
IDU Address
Programmable Controller —
When
setting
an
address, connect only one wired controller to an indoor unit.
1. Press
FAN
and
BACK
simultaneously for five seconds to
access parameter settings as shown in Fig. 38.
2. Press
TEMP. UP
or
TEMP. DOWN
to move the cursor
and choose IDU ADDRESSING. Press
MENU/OK
to
access this setting.
3. Press
TEMP. UP
or
TEMP. DOWN
to choose the
address you want to set as shown in Fig. 39. Press
MENU/OK
to send this address to the IDU.
Fig. 39 —Programmable Controller Setting IDU
Address
4. Press BACK twice or wait 30 seconds to automatically
exit the parameter settings menu.
#
MODE
FAN
TEMP. DOWN
OK
TEMP. UP
ON/OFF
TIMER
ROOM TEMP.
SWING
Fig. 38 — Programmable Controller IDU
Addressing Menu
MODE
FAN
MENU
TEMP. DOWN
TEMP. UP
OK
BACK
ON/OFF
MODE
FAN
MENU
TEMP. DOWN
OK
TEMP. UP
BACK
ON/OFF
