background image

Failure to follow this warning could cause 
personal injury, death and /or equipment 
damage.

Failure to follow this warning could cause 
personal injury or death damage.

Puron® (R-410A) refrigerant systems 
operate at higher pressures than standard 
R-22 systems. Do not use R-22 service 
equipment or components on Puron® 
refrigerant equipment.

Relieve pressure and recover all refrigerant 
before system repair or final unit disposal.
Wear safety glasses and gloves when handling 
refrigerants. Keep torches and other ignition 
sources away from refrigerants and oils.

Before performing service or maintenance 
operations on unit, always turn off main 
power switch to unit and install lockout 
tag. Unit may have more than one power 
switch.

Sheet metal parts may have sharp edges or 
burrs. Use care and wear appropriate protective 
clothing, safety glasses and gloves when 
handling parts and servicing air conditioning 
equipment

WARNING

WARNING

UNIT OPERATION AND SAFETY 

HAZARD

PERSONAL SAFETY AND ENVIRONMENTAL 

HAZARD

WARNING

CAUTION

ELECTRIC SHOCK HAZARD

CUT HAZARD

Failure to follow this warning could cause 
personal injury or death.          

Failure to follow this warning could cause 
personal injury.

Page 3

Содержание 40RUM Series





























Отзывы: