![Carrier 012S Series Скачать руководство пользователя страница 2](http://html.mh-extra.com/html/carrier/012s-series/012s-series_owners-manual_2560391002.webp)
AUTOMATIC OPERATION (AUTO
CHANGEOVER)
FILTER
PRE DEF
TIMER
OPERATION
RESET
Models
:
42NQ012, 42NQV012S
Models
:
42NQ009, 42NQV009S
1
Press
FIX : Move the louver in
the desired vertical direction.
2
Press
SWING: Swing the air
automatically and press again
to stop.
3
For horizontal direction, adjust
manually.
DANGER
• Do not install, repair, open or remove the cover. It may expose you to
dangerous voltages. Ask the dealer or the specialist to do this.
• Turning off the power supply will not prevent potential electric shock.
• The appliance shall be installed in accordance with national wiring
regulation.
• Means for disconnection from the supply having a contact separation
of at least 3 mm in all poles must be incorporated in the
fi
xed wiring.
WARNING
• Do not expose your body directly to cool air for a long time.
• Do not insert your
fi
nger or any article into the air inlet/outlet.
• When an abnormality (burning smell, etc.) occurs, stop the air
conditioner and disconnect the power supply or turn off the breaker.
CAUTION
• Do not wash the unit with water. It may cause an electric shock.
• Do not use this air conditioner for other purposes such as preserving
food, breeding animal, etc.
• Do not step or put anything on the indoor/outdoor unit. It may cause
an injury or damage the unit.
• Do not touch aluminium
fi
n because it may cause an injury.
• Before cleaning the unit, turn off the main switch or the circuit
breaker.
• When the unit won’t be used for a long time, turn off the main switch
or the circuit breaker.
• It is recommended that maintenance be performed by a specialist
when the unit has been operated for a long time.
PRECAUTIONS FOR SAFETY
INDOOR UNIT DISPLAY
1
FILTER (Orange)
2
PRE DEF (DE-FROST) (Orange)
3
TIMER (Yellow)
4
OPERATION (Green)
5
RESET button
1
PREPARATION BEFORE USE
2
Preparing Filters
1
. Open the air inlet grille and remove the air
fi
lters.
2.
Attach
the
fi
lters. (see detail in the accessory sheet)
Loading Batteries
1
. Remove the cover. Insert 2 new
batteries (AAA type) following the
(+) and (–) positions.
2. Push RST : Reset the remote
control.
3. Place the cover back.
AIRFLOW DIRECTION
3
Note:
• Do not move the louver manually by others.
• The louver may move automatically positioning by operation mode.
A
C
L
1
OPERATION (Green)
2
TIMER (Yellow)
3
RESET button
REMOTE CONTROL FUNCTION
4
1
Infrared signal emitter
2
Set louver button (FIX)
3
Auto louver button (SWING)
4
Mode
select
button
(MODE)
5
Reset
button
(RST)
6
On timer button (ON)
7
Off timer button (OFF)
8
Reserve
button
(SET)
9
Cancel
button
(CLR)
!
Check button (CHK)
"
ECO button (ECO)
#
Fan speed button (FAN)
$
Start/Stop
button
(START/STOP)
%
Temperature
button
(
)
5
To automatically select cooling or fan only operation and control fan speed.
1
. Press MODE : Select AUTO.
2.
Press
: Set the desired temperature.
The manufacture setting temperature is 24°C and available range of set
temperature is ±5°C.
COOLING / HEAT / AUTO FAN OPERATION
6
1
. Press MODE: Select COOL, HEAT or AUTO FAN.
2. Press
: Set the desired temperature.
COOL:
Min
1
7
o
C, HEAT: Max 30
o
C, AUTO FAN :
No temperature indication
3. Press
FAN : Select AUTO, LOW
, MED
, HIGH
.
DRY OPERATION
7
For dehumidi
fi
cation, a moderate cooling performance is controlled
automatically.
1
. Press MODE : Select Dry.
2.
Press
: Set the desired temperature.
ECONOMICAL OPERATION
8
To automatically control room temperature, fan speed and operation mode
1
. Press ECO in the AUTO and COOL operation: Start and stop the
operation.
2. Press MODE or FAN after stopping the operation.
Note:
• Under certain conditions, ECO mode may not provide adequate cooling
due to energy saving features.
TEMPORARY OPERATION
9
SWING
MODE
TIMER
ON
OFF
SET
CLR
ECO
RST CHK
FIX
FAN
Hr.ON OFF
5
4
3
9
"
#
$
%
8
7
6
1
2
!
CLEANING
RESET
TIMER
OPERATION
In case of the misplaced or discharged remote control
•
Pressing the RESET button, the unit can start or
stop without using the remote control.
•
Operation mode is set on
AUTOMATIC operation, preset
temperature is 24°C and fan
operation is automatic speed.
111
0250
1
28.indb 2
111
0250
1
28.indb 2
1
2/22/07
1
0:53:47 AM
1
2/22/07
1
0:53:47 AM