Carrier TRANSICOLD VECTOR 8100, Руководство по эксплуатации и обслуживанию, Страница: 103 / 294

5–5 62-11785
5.2.3 Configuration Settings
Configuration settings match the APX Control System to the unit and define APX Control System action under
various operational conditions. Instructions for working with Configurations are provided in
Figure 5.4 .
1. Enter the Technicians Menu, highlight CONFIGURATION SETTINGS and then press the “=” key as
described in Figure 5.1 .
Figure 5.4 Setting Configurations
2. Eleven Configuration sub-menus will be available. To scroll through the Configuration sub-menu list, press
the
▲
or
▼
key. The sub-menus will highlight as the list is scrolled. The available sub-menus include:
Refer to Table 5–1 , for information on the settings in each sub-menu and resultant System actions.
3. With the desired sub-menu highlighted, press the “=” key. The individual Configurations within the sub-menu
will display. There are two types of Configuration screens, data entry screens and value selection screens.
4. Data entry screens are displayed for the UNIT MODEL #, TRAILER ID #, UNIT SERIAL #, SET DATE &
TIME and SET NEW HOURS (in a replacement main microprocessor) Configurations. To change a data
entry screen press the “=” key with the configuration highlighted.
5. A data entry screen will be displayed with the entry points in a horizontal row of “fields”. The first selection
“field” will be highlighted. Press the “=” key to enter the field then press the
▲
or
▼
key to scroll through the
available selections.
• When setting a number, the numbers 1 to 9 and the letters A to Z will be displayed.
• When entering the date & time the day, month, year, hour or minute will be displayed. The system uses a
24 hour clock. Hours 00 to 11 are AM and hours 12 to 23 are PM.
• With the desired selection in the field, press the “=” key to save the field entry.
6. Press the
▲
or
▼
key to move to the next field or to the desired field. Press the “=” key to enter the field.
7. Press the
▲
or
▼
key to scroll through the available selections. With the desired selection in the field, press
the “=” key to save the field entry.
8. Continue as above to enter additional field changes as required.
9. When all the fields are displayed as desired, press the SAVE soft key to save the setting into memory.
10. Continue as above to enter additional UNIT IDENTIFICATION changes as required.
CONFIGURATION SETTINGS (1 OF 11)
UN IT IDENTIFICATION
BACK EXIT
START-STOP SETTINGS
SETPOINT(S) & RANGE LOCK
INTELLISET & PRODUCT SHIELD
UNIT IDENTIFICATION (2 OF 4)
TRAILER ID#:
BACK EXIT
UNIT SERIQL #:
SET DATA & TIME:
UNIT MODEL #:
SET #
CANCEL
SAVE
Press UP/DOWN To Select Field
INSTRUCTIONS
SET DATE AND TIME
MAY 2015 11:58
CANCEL
SAVE
23
MY TRAILER #1
MAY 18 2015 11:58
NDL233N0AFA
NAR91108766
EQUAL To Modify Field
Press UP/DOWN To Select Field
INSTRUCTIONS
EQUAL To Modify Field