Carrier Access Wide Bank 28 DS3 Скачать руководство пользователя страница 33

Страница: 33 / 50

Wide Bank 28 DS3 - Release 2.4

T1/E1 Auto In-Service Detection (LOS Inhibit)

2. Determine Automatic In-Service Choices

Status

Your choice is

Auto In-Service
is turned Off

Turn on T1 automatic in-service detection and apply to T1s by placing T1s out
of service and then back in service.

1.  OPR-ARC-T1:tid::ctag;
2.  RMV-T1:tid:aid:ctag;
3.  ENT-T1:tid:aid:ctag;

Turn on E1 automatic in-service detection and apply to E1s by placing E1s out
of service and then back in service.

1.  OPR-ARC-E1:tid::ctag;
2.  RMV-E1:tid:aid:ctag;
3.  ENT-E1:tid:aid:ctag;

Auto In-Service
is turned On

Apply automatic in-service detection to T1 channels by placing T1s out of
service and then back in service.

1. RMV-T1:tid:aid:ctag;
2. ENT-T1:tid:aid:ctag;

Apply automatic in-service detection to E1 channels by placing E1s out of
service and then back in service.

1. RMV-E1:tid:aid:ctag;
2. ENT-E1:tid:aid:ctag;

Change automatic in-service detection delay time for T1 channels, where delay
is the number of hours, 1 to 168 (1 week).

ENT-T1:tid:aid:ctag::QI,delay;

Change automatic in-service detection delay time for E1 channels, where delay
is the number of hours, 1 to 168 (1 week).

ENT-E1:tid:aid:ctag::QI,delay;

Turn off T1 automatic in-service detection.

RLS-ARC-T1:tid::ctag;

Turn off E1 automatic in-service detection.

RLS-ARC-E1:tid::ctag;

AIDType

AID

DS1-1 to DS1-28, or ALL

E1-1 to E1-27, or ALL
(see

T3-E1 Configuration AIDs

page 8

)

Содержание Wide Bank 28 DS3



















































Результаты поиска

Содержание Wide Bank 28 DS3

Отзывы:

Carrier Access Wide Bank 28 DS3, Обзор, Страница: 33 / 50

Результаты поиска

Содержание Wide Bank 28 DS3

Отзывы: