Carrier Access Adit 3200 Скачать руководство пользователя страница 13

Страница: 13 / 262

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI

1-5

Web Based Management

Overview

Navigation Pane Icons

The following icons are available on the Navigation Pane:

Action Icons (for Managing Lists)

The following icons may appear in a list, under

Action

Home

- Displays the Network Map.

Quick Setup

- Allows you to quickly configure your Internet connection.

Network Connections

- Allows you to create and configure network connections.

Security

- Allows you to configure the Firewall and regulate communication between

the Internet and the network.

Voice Over IP

- Allows you to configure VoIP features.

Note:

This feature is not supported on the Adit 3200.

Advanced

- Allows you to control network parameters (DHCP server, DNS) and

perform administrative functions, including changing passwords and upgrading the
system.

System Monitoring

- Displays system information, statistics, logs, and alarms.

Logout

- Logs you out of the current session.

Add

- Adds an item to the list.

Edit

- Edits an item in the list.

Delete

- Removes an item from the list.

Содержание Adit 3200







































































































































































































































































Результаты поиска

Содержание Adit 3200

Отзывы:

Carrier Access Adit 3200, Справочное руководство, Страница: 13 / 262

Результаты поиска

Содержание Adit 3200

Отзывы: