CARRARO DS1525 Скачать руководство пользователя страница 5

 

I  N  S  T  R  U  C  T  I  O  N  S 

For the installation and maintenance of  DS1525 - DS1550 -

DS2525 - DS2550 desuperheaters

 

 

IMI0030E.doc 

Rev.4 20/08/12 

 

20090 SEGRATE (MI)- via E.Fermi 

EMAIL: 

[email protected]

 

TEL.(02) 269912.1 - FAX.(02) 2692.2452

 

Page 5 of 17

 

 

5.

       

SAFETY WARNINGS

 

 

Thorough maintenance operations and overhauls are important for the safe and reliable operation of all 
desuperheaters. 
The service procedures recommended by CARRARO and described in this manual are effective methods 
for carrying out maintenance operations. Please note that this service manual contains various warning 
and caution notices which should be read carefully in order to minimise the risk of injury to people or the 
possibility of using incorrect work methods which may damage the desuperheaters or make them unsafe. 
It is important to realise, however, that these warnings cannot be exhaustive.

 

CARRARO is unable to know, assess and inform customers or users of all the conceivable methods of 
performing maintenance operations and all the risks deriving from the use of such methods. 
Consequently, CARRARO has not even attempted to start such a task. Therefore, whoever uses a 
service method or piece of equipment which is not recommended by CARRARO must make sure that 
neither his own or other people's safety, nor desuperheater safety and performance are jeopardised by 
the chosen method.

 

In case of doubt about the method used, please contact CARRARO. 
Take all safety precautions while testing, installing or dismounting the product; these include, wearing ear 
plugs, goggles and safety clothing, such as gloves, both in or near the work area. 
Given the large number of conditions and circumstances that may arise while working on the products 
and the consequent risks deriving from the way this is done, CARRARO is not able to prevent all risks of 
injury to people and damage to property and can only help by asking you to take the utmost care and 
giving you the following safety suggestions. 
Users of CARRARO products are responsible for training the staff that will use the product. 
It is most important for these people to acquire a thorough knowledge of the instructions relative to the 
product, especially the ones contained in this manual. 

 
 

Содержание DS1525


















Отзывы: