CarpMadness Phantom 2020, Инструкции по сборке

Страница: 8 / 21

As a holder for the plate a piece of wood or something similar has to be pasted into. On
this the servo plate is later screwed or only glued.
(An adhesive bond, unlike a bolted joint, is not a rigid connection and can interfere with
the movements to a lesser extent, so we clearly prefer the adhesive bond)
Now it is important to fit the servo exactly. For this purpose, the steering unit of the jet
must be absolutely straight.
Then gently tighten the 2 Bowden cables on the servo arms. The servo's must be as
close to the engine as possible, so that the echo sounder can be installed in the front (or
retrofitted).
Please divide this plate in the middle to get 2 supports for the servo's (feeder flap and
control)