3
Operating Instructions
Remove pull plate and restrictor plate from base of machine. Put rubber mat aside for later use.
FIG 1
•
Setup base in corner of room being removed, and plug unit into a grounded wall outlet.
•
Cut carpet into 3 foot widths across the room.
•
Pull up starting edge of carpet to be removed, opposite of machine.
•
Make a small vertical slit in carpet, place restrictor plate underneath the raised edge, making sure bolt
passes through carpet. (FIG 1)
•
Place pull plate assembly on top side of carpet, making sure that bolt passes through center of pull plate,
and tack strip engages carpet. (FIG 2&3)
•
Make sure that small hole is facing base of machine, NOT the handle side. (FIG 2)
•
Attach wing nut securely to the assembly.
FIG 2 FIG 3
