Carp Royal Duke, Руководство пользователя

Страница: 21 / 24

2 The remote control has no
signal The antenna is not
connected. Check if the boat antenna is
connected.
There is no matching
channel with the boat Rematch the channel
Remote control signals are
sometimes disappeared or
not controlled Near channel is interfering Go to the settings menu and
reselect a channel to match
3 Unable to navigate The target point is too close
to the current point Reset target point
Compass point is incorrect Recalibrate the compass
4 Fish finder does not display
properly There is a reflector at the
bottom of the water, or the
water depth is too shallow. Drive the boat to the deep
side of the water
5 A deviation in the direction
of the boat head No calibration of the
compass Calibrate compass
6 Navigation or automatic
driving goes a arc line No calibration of the
compass Calibrate compass
7 The sonar fish screen is not
displaying properly, or the
sonar signal is very weak
Sonar sensitivity Settings are
too high
In the Settings menu,
reduce the sonar sensitivity
to 60% or less
The sonar refresh speed
setting is too high
In the Settings menu,
reduce the “chart speed” to
60% or less
8 Sonar fish finder interface is
not displayed
Even if the distance is very
close, there is no display, so
there is probably a similar
frequency interference
nearby
In the Settings menu, select
“sonar channel” and select a
channel to re-match the
frequency