BRUSHLESS OUTBOARD X series USER MANUAL
（2022）
FIRST TIME RUNNING
FIN INSTALLMENT (A)
Take out the plastic fin out of the accessory box. Loosen off the screws. Find the screw holes on front endbell. Keep the
fin and screw holes aligned. Insert the fin and re-tighten the screws.
Make sure the screws are properly tightened to prevent the fin from loosening.
HANDLE INSTALLMENT (B)
Turn the handle 90 degrees along the axis, clip it into the rear control box.
Keep the handle in horizontal and start to use.
Note: Do not fold the handle after installment, other-wise the self-lock could be damaged.
When need to repair, remove the sticker, pinch out the self-lock button, and fold the handle to save package size.
(A)
(B)
BATTERY CONNECTION METHOD
Before connecting the motor’s cables to the battery terminals, ensure all switches are in the OFF position. Stand clear of
the propeller. Connect the red cable to the positive (+) terminal and the black cable to the negative (-) terminal . Make
sure the terminals are clean before Connecting. A clean connection will minimize power wastage and give the maximum
