- 9 -
3.1 Connection
The mini series is easy to use product. Simply connect your source (CD
player, MP3 player, etc..) and speakers following below steps, you can enjoy
the high quality music in a second:
-
Connect your CD player to the “Line In” RCA socket (6) using normal RCA
audio cable (not included)
-
You can also connect your MP3 player to the 3.5mm AUX input socket (2)
using a mini jack cable (not included). Once this input is used, it will
over-ride the rear RCA input (6).
-
You can connect your PC/laptop to ERNESTOLONE using the supplied
USB cable
-
Connect your speakers to the binding post (9)
-
Connect the power adaptor to the “Power In” connector (11)
It’s now all set and you are ready to enjoy your music.
3.2 Operation
Please follow the below steps such that you can enjoy the product without any
difficulty:
-
Turn the “Volume controller” (1) clockwise to turn on your ERNESTOLONE.
Now the vacuum tube (12) will slowly turn on and you will see blue light
from the top window. After a few seconds, the amplifier will turn on
automatically and power indicator (5) will turn to blue color.
-
Now, you can use the Input Selector (4) to select music source (line / USB)
-
If “USB” input is selected, please refer to below section 3.2.1
-
If “line” input is selected, play your source equipment and you can hear
music from your speakers. Now, you can control the volume level by
turning the “Volume controller” (1)
-
There is a “3.5mm Headphone socket” (3) in the front panel. You can
connect your headphone to the unit. Once your headphone is connected,
the speaker output will be disconnected automatically.
-
To turn off the amplifier
, turn the “Volume controller” (1)
counter-clockwise until you hear “click”. Now, you will see both the tube
(12) and the “Power Indicator” (5) turned off.
Содержание Ernestolone
Страница 1: ......
