INST-PM-7540-3-VIS
Rev A 04/16/2018
2.
Remove (2) screws on both sides of lower grill assembly using Phillips screwdriver
bit as shown below.
Note: Retain screws.
3.
Remove lower grill assembly by pulling away from chamber to release (2) bottom
latches as shown below.
4.
Unfasten (4) Velcro connections on air filter and discard filter as shown below.
Note: Remove and discard any Velcro discs with loops that may still be attached
to hook discs located on condenser and replace hook discs as needed.
Lower Grill Assembly Screws
Lower Grill Assembly Latches
Air Filter
Velcro Connection Locations