12
Carolina Cooker®
844-478-4334
Model M40322 & M49469
January 2021
5.3 Assembly
Note:
Steps 1 through 4 are for Model M40322 only. For
Model M49469, go to Step 5.
1. Place the burner upside down on a level surface.
2. Bolt the legs onto the wind shield using two M6 bolts
and nuts on each leg. Do not fully tighten the bolts.
3. Bolt the stabilizer ring to the legs using two M6 bolts
and nuts on each leg. Do not fully tighten the bolts.
4. Tighten all twelve bolts securely.
5. Verify that the burner head is fastened securely to
the base with the bolt and nut.
Note:
The burner comes bolted to the frame but could
have loosened during shipping.
6. Connect the regulator hose assembly to the burner
assembly. The brass fitting should be tightened
securely, but not so tight that it binds the air shutter.
The air shutter should turn by hand, but hold its
position when released.
Note:
To prevent damage to fittings or burner assembly
when tightening connection, hold the brass fitting with
one wrench while tightening the regulator hose
assembly fitting with the other wrench. Do not tighten
the connection using a single wrench.
Содержание M40322
Страница 27: ......