2
www.CarnivalKingSupplies.com
.
||||| [email protected]
HOT DOG ROLLER GRILLS Manual
Storage and Transportation
The Carnival King Roller must remain upright at all times, and should never be turned sideways or upside
down for storage. All power to the roller must be disconnected for proper storage. A cover for the machine is
recommended to avoid dust buildup, and the roller should be stored in an area away from flammable materials
and moisture.
Similar to storage, the roller should remain upright during all transportation. Avoid vibration for long periods
of time.
MODEL
WIDTH
DEPTH
HEIGHT
# ROLLERS
# HOT DOGS
VOLTAGE
WATTAGE
CERTIFICATIONS
382HDRG12
22½"
10"
7"
5
12
120
650
CE, cETLus, ETL Sanitation
382HDRG18
22½"
13"
7"
7
18
120
910
CE, cETLus, ETL Sanitation
382HDRG24
22½"
16"
7"
9
24
120
1170
CE, cETLus, ETL Sanitation
382HDRG30
22½"
19"
7"
11
30
120
1430
CE, cETLus, ETL Sanitation
General Safety Precautions
1. This manual will outline safety warnings and precautions, operating, inspection, maintenance, and cleaning
procedures. The warnings and instructions reviewed in this manual cannot cover all possible conditions and
situations that may occur. Factors such as caution and common sense cannot be built into this product and it is
trusted the operator will follow these measures.
2. This hot dog roller grill must never be modified and should only be used for its intended purpose.
3. Always check that this hot dog roller is plugged into a grounded outlet with the appropriate electrical supply.
The grounding pin should NEVER be removed or manipulated, and ensure that the wall outlet being used
is properly grounded. If it is not, or you must install a grounded outlet. Have the work performed only by a
certified electrician who is properly qualified to meet local safety and electrical codes.
4. To unplug the product, firmly grasp the plug and remove from the outlet – never pull on the cord itself.
5. Ensure that the power outlet, plug, and cord being used are in good, working condition. Damaged components
should be repaired by a certified electrician who is qualified to meet local safety and electrical codes. DO NOT
use this product with extension cords or 3 prong adaptors. Even with a properly functioning power cord, keep
water away from the cord and avoid letting your power cord run over carpets or heating devices.
6. If missing or broken components are found, leave the roller TURNED OFF. Do not attempt to use the roller.
Contact a qualified service technician to make all repairs.
7. Never install the roller in an enclosed space; it is designed for freestanding, INDOOR use ONLY. This machine
should remain upright at all times – when in use or when in transport.
8. Use in the presence of flammable liquids, gases, dust, or other explosive situations should be avoided.
Specs
