Install the batteries as shown below and replace the
battery compartment cover.
The pedi spin includes 2 types of filing and finishing
pads
The filing plate
This plate is used for filing thick tough skin and
should not be used on normal or soft skin
The finishing plate
The finishing plate is used to
smooth off and buff the rough
edges left by the filing plate and
will help to maintain soft smooth
skin reducing the need for filing.
To use the pedi spin attach the
desired plate as in
Set the speed of the pedi spin as the product has a
two speed Setting
Gently place on the required area
and move in a circular motion
until the hard skin has been
removed or the skin has been
buffed to a soft finish.
To replace a used finishing pad with a new one
1. Peel off existing pad from the plate
2. Clean any residual residue from the plate that
was left by the old finishing pad
3. Once clean peel the paper from the rear of the
new pad to expose the adhesive
4. Center the pad on the plate and press to ensure
good adhesion
The best way to ensure baby soft feet is to follow
the steps below
1. Soak you feet in warm water for around 10-15
minutes. Its a great excuse to take it easy for a
little while
2. Thoroughly dry your feet and then begin
treatment with the PEDI SPIN
3. After using PEDI SPIN apply your favourite
moisturiser or foot cream.
4. Repeat the process once a week to achieve the
baby soft feet that you desire.
CLEANING YOUR APPLIANCE
The PEDI SPIN has a chamber in each of the
polishing plates in which the debris is collected
TO CLEAN
• Separate the polishing plate from the head
of the product split the plate as shown in
illustration below.
• Empty the debris into the bin and thoroughly
clean the polishing plate with the brush provided
with the product re-assemble the polishing plate
• DO NOT RINSE WITH WATER AS THIS MAY
DAMAGE THE MOTOR
• Store in a dry area with the caps on.
• If you do not intend to use the product for a long
time it is recommended that the batteries are
taken out
TROUBLESHOOTING
• If the spinning head becomes weak, insert new
batteries.
• If the Pedi Spin does not turn on, be sure the
batteries are inserted correctly or replace with
new batteries.
• If there is a reduction in performance of the
finishing plate, replace the finishing pad.
• If you notice excessive debris during use, clean
the trapped debris from the filing plate head.
USING YOUR APPLIANCE
We hope you enjoy your
appliance for many years.
As a thank you for purchasing
one of our fantastic products,
we are giving you an extra
2 years peace of mind.
To receive your extra 2 years
guarantee, register your
appliance online by visiting
www.carmenonline.co
Thank You!
Should you have a problem
with your appliance or need any
spare parts please call our
Service Department on:
0871 221 3622
Distributed throughout the UK
by RKW ltd
